云南KLR20A型 座驾前移式电动叉车2T
采用美国CURTIS电控系统
标配EPS电动助力转向系统
创新的驱动减震技术
门架大高度自断电功能
大容量蓄电池
噪音液压站
KLR10A.KLR15A.KLR20A 座驾前移式电动叉车 | ||||||
Model(型号) | KLR10A | KLR15A | KLR20A | |||
Performance(性能) | Maximum load capacity (负载能力) |
|
kg | 1000 | 1500 | 2000 |
with load center at (载荷中心距) | Q | mm | 500 | 500 | 500 | |
Maximum lifting height (起升高度) | H3 | mm | 1600 | 1600 | 1600 | |
Reach length (前移距离) | E | mm | 490 | 510 | 570 | |
Tiltiing angle (up/down) (倾斜角度) | S |
|
3/5 | 3/5 | 3/5 | |
Travel speed (without load) (无负载行驶速度) |
|
km/h | 5 | 5 | 5 | |
Travel speed (with load) (负载行驶速度) |
|
km/h | 5 | 5 | 5 | |
Lifting speed (without load) (无负载起升速度) |
|
mm/h | 180 | 180 | 180 | |
Lifting speed (with load)(负载起升速度) |
|
mm/h | 100 | 100 | 100 | |
Ascend slope ability (without load ) (无负载大爬坡能力) |
|
% | 8 | 8 | 8 | |
Ascend slope ability (with load ) (负载大爬坡能力) |
|
% | 5 | 5 | 5 | |
Weight (without battery) (不含电池重量) |
|
kg | 2050 | 2080 | 2140 | |
Dimensions(尺寸) | Overall length of frame(mast no reach) (整车长度)(门架没前移不含货叉) | L | mm | 1680 | 1780 | 1880 |
Overall length (mast no reach) (整车长度)(门架没前移含货叉) | L1 | mm | 2260 | 2340 | 2400 | |
Overall length (mast reach)(门架前移后整车长度) | L2 | mm | 2670 | 2770 | 2900 | |
Overall width of frame (整车宽度) | B | mm | 1035 | 1035 | 1035 | |
Overhead guard height 护顶架高度 |
|
mm | 2185 | 2180 | 2180 | |
Mast lowered height (门架降至低高度) | H1 | mm | 2200 | 2200 | 2200 | |
Max height(mast lifted with backrest) (门架起升至整车高度) | H2 | mm | 2650 | 2650 | 2650 | |
Wheelbase (轴距) | Y | mm | 1310 | 1410 | 1510 | |
Fork width (货叉尺寸) |
|
mm | 100/35/1070 | 100/40/1070 | ||
Fork spread width (货叉外侧宽度) |
|
mm | 200-725 | 200-725 | 200-725 | |
Fork lowered height (货叉降至低高度) | W1 | mm | 35 | 40 | 40 | |
Turning radius (小转弯半径) | Wa | mm | 1560 | 1710 | 1860 | |
Min intersecting aisle width (小转弯通道宽度理论值) | Asts | mm | 2540 | 2650 | 2670 | |
Tire(轮胎) | Front wheel (承载轮) |
|
mm | 210*75 | 210*75 | 210*75 |
Drive wheel (驱动轮) |
|
mm | 230*75 | 230*75 | 230*75 | |
Caster wheel (平衡轮) |
|
mm | 130*55 | 130*55 | 130*55 | |
Wheel material (车轮类型) | polyurethane(聚氨酯) | |||||
Electrical components(动力形式) | Drive motor type (驱动电机类型) | AC series motor(交流电机) | ||||
Rated output (功率) | 9 | kw | 1.5 | 1.5 | 1.5 | |
Hoist motor type (起升电机类型) | DC series motor(直流电机) | |||||
Rated output (功率) |
|
kw | 3 | 3 | 3 | |
battery (电池) | Voltage (电压) |
|
V | 24 | 24 | 24 |
Capacity (容量) |
|
AH | 270 | |||
Weight (重量) |
|
kg | 260 |
门架高度参数:
Mast Type门架类型 | Max.Fork height (货叉大高度) | Mast Lowered (门架降低时高度) | Mast Extended (门架延伸时高度) | Free Lift(自由行程) |
KLR10 KLR15 KLR20 | KLR10 KLR15 KLR20 | KLR10 KLR15 KLR20 | KLR10 KLR15 KLR20 | |
Simplex Mast (2stage)2级门架 | 2000 | 1475 | 3050 | / |
2500 | 1725 | 3550 | / | |
3000 | 1975 | 4050 | / | |
3500 | 2225 | 4550 | / | |
4000 | 2475 | 5050 | / | |
Triplex Mast(3stage Ful Free Lift 3级门架自由行程 | 4500 | 2015 | 5550 | 1530 |
5000 | 2240 | 6050 | 1710 | |
5500 | 2400 | 6550 | 1860 | |
6000 | 2579 | 7050 | 2030 | |
|
|
|
|
外形尺寸图:
科力电动叉车防腐设计技术主要从以下几方面作了处理:
1、 电器件与接头全部在车体内侧
2、 车体外露易进水部位设防尘罩
3、 结构件采用磷化底漆及铁红环氧酯底漆、不饱和聚脂腻子(原子灰),品牌漆耐腐蚀丙烯酸聚氨脂磁漆
4、 薄板件低温磷化前处理和粉末涂装工艺
5、 车体外壳易碰撞部分外包不锈钢
6、 后机罩采用纤维强化塑料模具成型
科力电动叉车同时对车体上所有工艺孔及功能孔加防水塞,车型流线型设计有效防止尘埃积垢和积水,车体下方开设漏液孔等防腐设计方案,大大延长了科力电动叉车在腐蚀作业环境中的使用寿命。
下一页:没有了…
- 诺力货梯入驻口味王槟榔厂2024-06-17
- 诺力叉车无方向,无提升,无倾斜故障,怎么维修2024-05-13
- 电动叉车十大品牌排行榜2024-03-29
- 长沙诺力叉车服务新能源企业集团2024-02-15
- 长沙诺力叉车是长沙货梯厂家2024-01-18
- 凯尔特固定式登车桥批量安装上海外高桥保税区2023-12-08