站驾式托盘堆垛车
➤ CURTIS柯蒂斯电控,控制器多重自动保护系统。
➤ 阻尼减震弹簧无需频繁调节,即可主动根据路面状况调整立式驱动单元,降低地面对驱动单元的冲击,平衡了驱动 平衡轮的受力,提高了平稳运行效率。➤ 带缓冲液压泵站,噪音低,震动小,密封性好,起升下降平稳可靠。
➤ 交流驱动,无碳刷,免维护,能电机,控制,输出强劲动力。
➤ 紧急断电开关作为标准配置,只需按下紧急停止按钮就可以切断所有电源,车子立即停止或 紧急情况下快速断电,提供安全保护。
➤ 多功能手柄,集成控制(加速、喇叭、紧急方向、升降按钮),人机设计操作更加舒适。
➤ 门架宽视野设计,专用槽钢,强度高。
➤ Because of CURTIS electronic control, so we have multiple automatic protection system controllers.
➤ Without frequently adjustment, Damping suspension spring can take the initiative to adjust vertical drive unit according to road conditions, reduce the impact of the drive unit, balance the force of the balance wheel, raise the efficiency and smoothly of the running.
➤ High quality with buffer hydraulic pump station has the character of low noise, low vibration, sealing good, smooth and reliable hoisting and falling.
➤ Alternating current driving, no carbon brush, free maintenance, highly efficient motor, accuracy control, powerfully output.
➤ We consider emergency power switch as a standard configuration. Just press the emergency stop button to cut off all the power in case of an emergency, the car can stop immediately.
➤ We have Multi-function handle and integrated control (Like acceleration, horn, emergency direction, lift button). All this function makes the operation more comfortable.
➤ The door frame design is wide field of vision, dedicated channel steel, high strength.
参数表:
安徽宇锋相关证书
➤特种设备制造许可证,即TS认证。是指******质量监督检验检疫总局对特种设备的生产(含设计、制造、安装、改造、维修等项目)、使用、检验检测相关单位进行监督检查,对经评定合格的单位给予从业许可,授予使用TS认证标志的管理行为。无此证车辆无法上牌(未经允许不得它用);
➤型式试验合格证,对于特种设备来说,型式试验是取得制造许可的前提,试验依据是型式试验规程或型式试验细则,无此证车辆无法上牌(未经允许不得它用);
➤CE认证,“CE”标志是一种安全认证标志,被视为制造商打开并进入欧洲市场的护照。CE代表欧洲统一(CONFORMITE EUROPEENNE)(未经允许不得它用);
➤ISO9001质量体系认证,凡是通过认证的企业,在各项管理系统整合上已达到了标准,表明企业能持续稳定地向顾客提供预期和满意的合格产品。(未经允许不得它用)
上一页:1.5吨托盘搬运车
下一页:前移式电动叉车A款(24V)
- 诺力货梯入驻口味王槟榔厂2024-06-17
- 诺力叉车无方向,无提升,无倾斜故障,怎么维修2024-05-13
- 电动叉车十大品牌排行榜2024-03-29
- 长沙诺力叉车服务新能源企业集团2024-02-15
- 长沙诺力叉车是长沙货梯厂家2024-01-18
- 凯尔特固定式登车桥批量安装上海外高桥保税区2023-12-08